JC V1S 4-IN-1 Mobile Code Reading Programmer
Solder the disassembled original board at steep 2, on the new compatible battery, available for purchase of all the models in this section batteries no board
It is recommended to use one of the 2 soldering irons to connect the poles
Related products
iPhone 12 Mini 12 - 12 Pro
11
11 Pro - 11 Pro Max
Flex Connection iPhone 12 Series
Thanks to this Flex it is possible to operate on the whole 12 series.
Operation:
connect the iPhone 12 flex extension into the iPhone 8 board connector (see photo) and start the manufacturing process.
Installation guide
1)
Remove the black protective film.
2)
Removal of the original board from the battery
3)
Solder the disassembled original board at steep 2, on the new compatible battery, available for purchase of all the models in this section batteries no board
It is recommended to use one of the 2 soldering irons to connect the poles
QIANLI Spot Welder
4)
Put back the protective sticker you can buy from here:
Sticker Board Battery iPhone X - 12 Pro Max
5)
Connect the battery without closing the iPhone, simply to activate it, at this point we can turn it off.
6)
After activating the Steep 5 battery, connect the battery to the V1S and activate it.
JC V1S
7)
Last step use JC 1VS again to reset clicli, now we can connect the battery and restart iPhone without error message.
INSTALLATION GUIDE FLEX BOARD BATTERY IPHONE 11 - 12 PRO MAX
After installing the flex the effect of the battery must be as shown in the image.
